Table Throw

Sub-Total:

$0.00


Table Throw (8ft)

Our standard 3 sided or 4 sided table cover is a great table topper for trade shows, exhibitions, and any presentations.
Our table covers are dye sublimated and are 100% washable. 
This table cover is made of 8.8 oz. polyester table fabric with rounded corners and hangs approximately 2" above the floor. 
This material drapes over 4 sides of a 96" x 30" x 30" display table. 
Complete your presentation with our simple and cost-effective table cover.

How to wash:
Fabric can be machine washed with cold water and gentle cycle.
Lay flat or hang to dry. Wrinkles or creases can be eliminate with hand steamer.
Do NOT bleach, tumble dry, or iron.

Features:

  • High resolution full color digitally printed at 720 x 720
  • Dye sublimation 
  • Scratch resistant 
  • Washable

Material:

  • 8.8 oz. Polyester Table Fabric

Size and Weight:  

  • Graphic Size: 150.5”w x 84”h
  • Weight: 7.3 lbs

Please refer to Design Templates.

Create your file in CMYK mode with a resolution of 300dpi.
If your file has been created in RGB or includes RGB objects, we recommend converting the file to CMYK.
Do not include bleeding or crop marks in your artwork.
Your artwork should reflect only what you need to be printed in the final product.
Before you upload your artwork, be sure your artwork is sent in the same size or ratio as your order.
In order to provide you the fastest turn around, all artworks for Large Format products are sent directly to press.
We will not be responsible for any reprints if your file is sent in size ratio different than the measurements specified in your order.
If you need a decimal size or special size, you requested through our “Estimate” section.
If you are working with vector images (in programs like Adobe Illustrator), the final size artwork is not necessary unless you have placed photographs into your document. Then the above guidelines will apply.
All fonts should be converted to curves or outlines.
We suggest your files to be flatten or rasterized if possible to minimize the file size.
We accept the following file formats: EPS, TIF, PSD and PDF files.
JPG files are accepted, but they must be prepared properly (It’s strongly suggested that the JPG is created the closest size possible to the final print size).

Ask a question about Table Throw

Note: HTML is not translated!

Write a review

Please login or register to review